Skip to main content

Reply to "Combining 27" curves and 42" curves"

Moonman posted:

You have the right combination of degrees with 3 -O42 and 2-O27. Just cut an O42 by measuring 5.5" from rail end to rail end of the outside rail to create an O42 1/2 curve.

Then, the combo is O42>O42-1/2>O27>027>O42-1/2>O42

          30°>15°>45°>45°>15°>30° = 180°

It is about 31.5"-32" outside rail to outside rail wide.

here it is compared to the alternating proposal that you have:

R4D_Mixed_Curves

Both may work, but the wiggling of the alternating pattern may cause strange behavior of the trains.

 

Great idea. Thanks.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×