Yes it sure is!
Didn't get much done today. Was out of pocket for the early afternoon. Got the turret top roof put together and then wanted to paint the corbels, but I couldn't find them!!! I think I put them in a "safe place" so they wouldn't get lost or damaged. Now they're lost. It's no big deal I can reprint them. But I had to change the FEP on the 3D printer and that took the rest of the time I had. Oh well.
The upper turret roof consists of four laser cut segments with some laser cut formers underneath. In SU you're able to take a plane on an angle, a hip roof part for example, and flatten the planes so you can export them as developed surfaces. This works pretty well. After gluing it all together I coated it with some sanding sealer and will finish sand and paint it all tomorrow. I cut some relief in the roof bottom to clear the grain-of-wheat bulb and wire that's protruding out of the top of the turret underframe. I needed to use some Bondic to seal the roof segment joints.
I'm going to paint this part BEFORE gluing it onto the turret. The printer is ready to print as soon as I get to it tomorrow. I'm sure that I will find those corbels once the printer begins making the new ones. Murphy's law...
