I got the Cab Forward back together and restored. In addition to putting the newly repaired running gear back on, I did a thorough cleaning and oiling, and repainted the chipped and damaged white running board striping. Now I just have to figure the best way to get it to Sterling Heights, MI.
I then got the last street piece cut from the new Bristol Board I purchased last week and masked all the road markings. I had used some 1/8" masking tape when I did the original streets, and found some left, but not enough to do the entire job. Also the tape was very old and was losing its grip. So I cut 6mm Tamiya masking in half and used that to finish up the job.
I mixed up a batch of Artist's tube acrylic paint to match the dark gray I used originally, since I'm not replacing all the streets. I then put on one coat with a sponge paint brush and let it dry overnight. Tomorrow I'll do a second coat, and if necessary a 3rd. Instead of painting the lines, I just let the board's natural white be the color. After the painting I'll age it with a light spray of Nato Black in areas where tire rubber would be more prevalent. I have to replace all the manhole covers and put in the sewer inlets and it will be time to put them onto the layout.