Skip to main content

Reply to "Control TPC via DCS remote"

Penn-Pacific posted:
DdotCdot posted:

(I have created a TMCC engine in the DCS remote and assigned it ENG#1. I also programmed the TPC as ENG#1 beforehand. All of this following the guidelines in the thread.

 If I understand this correctly, try assigning the TMCC Locomotive to #2

There is no locomotive. I am referring to the TPC or Track Power Controllers - I tried assigning the TPC to ENG #2 but it did nothing...

Its not the programming it's the signal coming back into the command base from the TIU that isn't dishing out to the TPC as if it was the Cab-1 taking to it.

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×