Skip to main content

Reply to "Conventional PRR 0-4-0 6-11380 Sound and Lights Work, but Stopped Moving"

Mark I would take it apart clean out the old grease then lube the gear box and all moving parts, side rods etc and then work the flywheel back n fourth by HAND to make sure it feels frees up complete revolutions. I would turn it several revolutions both directions many times to make sure it feels free to your hands. what kind of lube do you use?

please let us know how you make out? if there is binding of any kind it can damage the boards from to much current draw!

Best of luck your friend Alan

also make sure the motor mount screws are tight otherwise that could be the reason it does not run in reverse correctly, when not tight the motor can shift and not mesh correctly with the worm gears and wheel gears!

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×