Andre,
What Bob suggested is what I was using, although I used a MTH Z750, PowerMaster, and CAB-1. Very easy hookup and ran the engines fine.
I will say command control (in my case DCS) runs my PS2 engines at a very slow speed, which is what I wanted. They move at 1 smph and run without hesitation/lurching at 3 smph. I could get all my engines (conventional and PS2 in conventional) to run at 4-5 smph using the CAB-1, but DCS has given me better control of my DCS engines, plus access to handling sounds (volume levels, turn on/off lights).
I could also activate the couplers using the horn/bell buttons on the CAB-1, can't recall what else I could do though.
|