I experimented with cutting out text using adhesive vinyl. I had to make several attempts with number of cuts and pressure to be able to remove the letters with transfer tape but am still having issues here. I think it is my removal technique.
It is somewhat difficult to see but below is the result of the Cricut cutting the text for Cargill and ADM.
I cut the letters ADM with normal spacing and lifted them off the vinyl sheet as one unit then placed on the main building.
I spaced the text out on design space then cut them. I lifted them off the vinyl sheet one at a time and placed on each silo. I had blue tape on the bottom so I could align them correctly.
The vinyl is shinny. I also sprayed gloss cost on the areas where the text would go so I need to go back and spray Dullcote to tone things back down. All in all the vinyl letters worked out pretty good (once I get the lift off technique right). The neat thing is that there are no 'decal lines' visible.
