Skip to main content

Reply to "cruise commander and fan driven smoke unit"

Just change you element to 22 to 27 ohm and your good.  Like I said, the first 2 pins from the right are AC center rail. One for Heater and one for smoke fan DC circuit.  IF you check continuity on those 2 pins without harness and it reads 0 ohms, you only need one of the wires to go to the ERR board hot.  The black to common.   G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×