This is from 1990. Its not TMCC. It has a QSI board for the EUnit, and a second board, which I believe is for the lighting. If there are resistors for the LEDs, I would assume they are on the boards and not inline with the wiring. I plan to gut the unit and remove both boards. It only has 2 can motors, headlights and 2 lights for the main cabin area. Only other strange thing I found so far is that the can motors have three wires. One wire for each brush, and one that looks like its soldered to the can itself. (Yellow & Blue to brushes, and green to can). I know this is all original, as I bought this new from a dealer back when it was released. I have to check it with my meter but I am suspecting the green is a ground wire. Just odd that they ran a ground wire from the outer shell of the can motor.
|