Skip to main content

Reply to "Crusie Commander M Help"

Finally got back to working on problem with CCM not working properly checked serial data pin24 on R4LC about 4.3 volts replaced R4LC still same I then replaced the mother board and all worked OK just to see if mother board was causing problem I put the original mother board in and it failed. Now engine is fixed

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×