Skip to main content

Reply to "Cutting Tubular Track"

Tin snips, needle nose pliers, a flat blade screwdriver, and a track pin. Cut the track to just above the bottom web with the tin snips, bend the track back and forth till the bottom web breaks. Open up the rail with a flat blade screwdriver. Stick in the track pin into the track. Use pliers to reshape rail around pin. Takes two minutes to do all 3 rails. No metal dust everywhere and no power tools required. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×