Skip to main content

Reply to "cw-80 transformer issues"

It sounds like your track connections are correct, but I'm a little confused as to how you have your accessory(ies) hooked up. The red and black accessory posts of the CW-80 should connect to the positive and negative wires of your accessory or go to a distribution panel to which several accessories are connected. Neither accessory terminal of the CW-80 should be connected to the track.

Also, make sure that you have read the manual and adjusted and set the correct accessory output voltage (typically 10v - 14v) on the CW-80 by holding the buttons down and adjusting the throttle per the manual.

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×