Skip to main content

Reply to "DC-3 Inspection Car - starts with track power- remote does not read it."

This engine is not getting the signal.

Make sure the DCC/DCS switch is set to DCS.  If that didn’t help open it and make sure the boards are seated properly.

I would also upgrade the software to the current version, 6.1.

Good luck.

Last edited by Danr

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×