Skip to main content

Reply to "DC-3 Inspection Car - starts with track power- remote does not read it."

I think the new , upgraded software in TIU and remote fixed the problems I was having. The switch was in DSC mode. On a piece of track completely removed from layout, on my dining room table, with 4.20 software, DC-3 ran fine, startup , forward , reverse, smoke all controlled from remote. Back on the layout with track power applied the DC-3 engine sound started by itself and the remote had no influence / control over the inspection car. After the software upgrade to TIU and remote and with the DC-3 on my layout the remote found, started and could now control the DC-3 Inspection Car. I think the software upgrade ultimately fixed the problems I was having. Thanks again for reply’s and help.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×