Skip to main content

Reply to "DCS 6.10 Upgrade - Learn from my mistakes and save yourself some time and aggravation"

Dave Zucal posted:

ROND45, you may have a bad TIU channel. Have you tried a signal test with all your other TIU channels, to see what the results are? Also try testing with another engine to see if the results are the same.

@Barry Broskowitz sent me some tips this morning, which I will get to. Your comment about a bad channel are intriguing. I did blow a fuse on fixed channel 1 and the out-posts were somewhat melted; so, I swapped in some posts from a variable channel that I never use. Bottom line - you could be right about the channel, the blown fuse notwithstanding, although power is coming out and going to the track. Perhaps the signal is not?

Many thanks. 

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×