Skip to main content

Reply to "DCS App Updater for iOS is in the Apple iOS App Store"

MTH RD posted:

Of course, diesel RPMs should ramp up with acceleration.  Well, actually, the other way around but, in model traindom....

So, I went out to our test layout and set a Lionel Legacy NP U33c diesel on the rails and tested it with the app.  To my surprise, no diesel rev changes relative to throttle.  So, I picked up our Legacy Cab 2 and ran the engine.  To my even greater surprise, no diesel rev changes relative to throttle.

It appears we are sending the exact same commands as the Legacy system with the same results.  That's a relief.

I will get into this further and try to update this thread with what is going on.  I vaguely remember some issue with the type of Legacy speed commands being sent but, of course, we opted to mimic the Legacy system as this would seemingly be acceptable to those users.

More to follow on this down the line. 

They always ramp up for me with my Cab 2.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×