Skip to main content

Reply to "DCS Explorer Fuse Replaced"

Update on fuse blowing with Explorer.  Even with only one train on the track pulling less than 1.5 amps, the fuse will blow during a derailment if the supply voltage to the Explorer from the Z1000/Zcontroller is 17 volts.  If I connect the Z1000 brick directly to the Explorer so the input voltage is 19+ volts, derailments cause the Explorer to cut power to the track and the fuse does not blow.  The circuit breaker on the Z1000 does not trip.  Maybe the shut down electronics in the Explorer don't work if the input voltage is below what the Z1000 puts out.  

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×