Skip to main content

Reply to "DCS/Legacy Interference"

The two signals don't mess with one another. Their frequencies are far apart. DCS is on the center rail and Legacy on the outer rails. Wiring track power for DCS will not affect Legacy.

Take an alligator clip jumper and put it somewhere on the track between the outer rails on one main line and try running the trains with both control systems powered up.

Both outside rails should be connected to common for Legacy. Also, the Legacy base track wire should be on the TIU out common or directly to the track.

Be sure that that you have the Legacy base power supply is plugged into a properly grounded receptacle. The house wiring is the other part of the Legacy system.

The ground plane wire is connected to earth  ground, not common, neutral AC or DC ground.

Last edited by Moonman

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×