Skip to main content

Reply to "DCS odd behavior - help please"

mustangtodd97 posted:

Did you ever move the engine address after you added them? I had a similar problem myseld with some MTH Premier Santa Fe Dash 8’s. They are all fine when i add them. No trouble when changing the address. But when i try to select them from either active or inactive list, i get the error (engine not on track, or no active dcs engine). I just delete the engine and then re-add it, and everything goes back to normal. As long as i don’t edit the address, there are no problems. I have over 50 MTH PS2 and PS3 engines, and these 3 are the only ones that react this way. I can’t explain it! But if you are changing addresses, you may have a similar problem.

I would change the batteries on those three engines.  If they are PS3 there is something wrong the board

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×