Skip to main content

DCS Problem

I run MTH trains on two separate tracks.  TIU Fixed 1 is connected to outside track.  Fixed 2 connected to inside track.  DCS works fine on Fixed 1(Engines (Proto 3) Run).  However, Fixed 2 on inside track, engines do not run (DCS controller says "Out of Range").  Tested current on inside track and there is 19.4 volts.  Conventional engine runs on it.  Placed Fixed 2 on outside track (to see if it works) and MTH engines (Proto 3) run.  I am puzzled, what could be the problem?  Daviddp

Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×