My very first post as the OP. Been lurking and made a few comments on others posts so here goes.
I finally got my layout up and running after a year and a half of preparation and building. I have a TUI, Wifi and using the app on my tablet. I am using a rebuilt Post war ZW. I set my transmitter voltage to 20 volts as shown on a voltmeter but I am seeing through the app that the TUI is reporting back 25 to 26 volts on the track. The voltmeter when placed on the track shows closer to the transmitter voltage. So my question is this normal to see this voltage as reported by the TIU. My track signal is 10 all around the track. I should add that I have 9 districts.
One other question is that I tried to feed the two separate wiring blocks that feed the districts each using a variable channel from the TIU and when I tried to run conventional engines all the controls on the app screen were grayed out. The only way it will work is to combine the two into into one variable channel. Now conventional engines work on variable and the one PS3 engine I have work as expected after changing the variable channel to fixed. Anyone know why the controls would be grayed out? Some sort of conflict? The TIU is is powered from a separate power supply. Hope I explained this properly so it is clear. One other thing. Has anyone noticed that when the WIU is plugged into the TIU it powers the TIU?
