Thank you! I use an MTH Z4000 and it's connected to the variable input and a jumper to the fixed voltage in. The variable out is the connected to the track. I use the remote wheel to apply voltage to the conventional locomotive on the track and I make sure to put the Z4000 at 0 (or off entirely) anytime I switch engines on the track. Just kinda strange behavior, though I realize the unit is really for running command control equipment. I'll likley just put the banana plugs back directly to the track when I run conventional to avoid the issue (phantom switch throws, buzzing in the locomotive, etc.) altogether, or at least until I familiarize myself a bit more with the proper operation of the unit. A bit of a learning curve I suppose. Thanks as always!
|