Skip to main content

Reply to "DCS Remote vs. App on issue with adding MTH engines"

Adrian,

I had pretty much detrnmeined that it was a capacitance issue. Anything longer than about 12" hanging off the serial port causes the problem to occur.

I took the easy way out and simply shared the serial port with a Y splitter. It's still necessary to disconnect the WIU when upgrading the TIU since when the WIU is connected to the serial port ti disrupts the data stream during the TIU's software upgrade.

Thanks for taking the time to look into this!

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×