Skip to main content

Reply to "DCS Wifi not connecting?"

OK, lets try this. Are you using the Auxiliary Input port to power your TIU, or is it powered by Fixed IN #1? If you are not using the Auxiliary Input port, perhaps the voltage it too low.

If you have a Z1000 (or similar), unplug all of the IN and Out connections to the TIU. Plug the Z1000 to the auxiliary input port on the TIU and hook up the USB cable to the WIU. You already know that you're dead in the water until those two pieces start talking. 

I know you said that you don't have one but my next step would be to do a Feature, and then Factory reset of the TIU with the DCS Remote. Any chance you have a friend with a remote you could borrow? Or, try connecting your WIU to different TIU and see if they will talk. If the WIU will connect to another TIU, then the problem is with your TIU or vice-versa.

Last edited by Gilly@N&W

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×