Skip to main content

Reply to "DCS will not recognize Proto 3 engine..."

I had an issue with an MTH train that, on occassion, would not be found by the DCS system. And eventually was never able to be read by the DCS. After much head banging and scratching, I came to find, one of the wires from the switch SHOOK LOOSE. I was able to GERRY RIG it. And now it works fine. 

Last edited by Pg3ibew

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×