Skip to main content

Reply to "Design of a $10-20 DCS-TIU Port Tester Tool?"

I don't have an "official" list of parts as most of them are all very generic parts.  All the resistors are 1/4w thru-hole resistors, the caps are all 50V ceramic.  The 74HC123N is the standard thru-hole 16 pin part, any maker is fine.  The LED is just a standard 5mm or 3mm LED in the color of your choice.  The regulator is the LM340LAZ-5.0 or similar three terminal 100ma regulator.  The pot is the only "special" item, it's the Bourns 3306W-1-202.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×