Thanks, GRJ, that was plenty fast! I was just fiddling with Stan's adds to the schematic, but not finished just yet. Now I can see how I did for correctness. I hadn't thought of the diode and cap on the supply, probably would have thought of that unless you or Stan said something. Some added learning for me for next time. 
Glad you stayed with the 1/4W resistors, I have lots of those, 1/8W not too many (if any?).
OSH Park says the PCB order has gone to the board maker, shouldn't be long now for Rev 1.0. Maybe sometime next week?
Also, thanks Mark!
RJR, if my parts are all correct and fit the PCBs I ordered, I will 'Share' the PCBs on OSH park and post a link here. I can also make a detailed parts list of what I ordered. I was hesitant to do that until I see if it all fits together and works correctly with my ordered parts. And also there were still discussions of added features going on with the first PCBs.
Then I will try the Rev. 1.1 project and do the same for it.
Only thing I didn't order was the jumper for the power switch, I have a ton of those already, from years of fiddling with computers.
I guess I can go ahead and share the 1.0 boards now, I will just mark them Rev 1.0. I'll do that later today and report back.
