Skip to main content

Reply to "Different transformers on separate tracks, all running conventional and DCS via Double Pole - Double Through switch."

Thank you for that information.
I did see that in my original wiring plan, so I made a correction.

My current plan, and this is currently working on a single loop of track, is to run power from the brick directly to bot controllers.
Each controller, is then wired to one or the other outer poles of the DPDT switch.
The center poles run of the DPDT switch, go out the track.

While both controllers would always be powered, only one can ever be connected to the track.

If you take your layout and move the DPDT switch to the downstream side of the controllers, you will have the layout of what I am currently using.

Thoughts?

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×