Skip to main content

Reply to "difficulty of DCS operation in Ross yard"

The TUI watchdog signal seems to be the problem.  If an engine is on the main line it will receive the watchdog signal when that output is powered up.  The engine will then startup in DCS mode, and travel under control from the remote any where on the layout, or into the yard.  But if the engine is in the yard, and a switch for power is thrown after the power has been applied to the channel of the TIU, the watchdog signal has turned off, and the engine will start up in conventional mode, with no control from the remote.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×