Skip to main content

Reply to "Double Heading Lionel Legacy Moguls"

RoyBoy posted:

"and motor moved back for better gear engagement.

Would you elaborate in this, please?

With the center drivers removed, looking up into the gearbox the motor worm is visible. It appears the point at which the worm gear engages the worm is very close to the end of the threads closest to the motor. I removed the two screws holding the motor to the mount and put a couple of washers between the motor and the mount moving it back about 1/16". May or may not have been necessary.

The center driver has just enough play so I know its not binding and there was grease in the gearbox from the factory.

Pete

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×