Skip to main content

Reply to "Dunham Studios "Family Heritage Lionel Layout""

John and Tom  did a thorough checking on the Lionel Accessories wired on the back platform. (The guys are working their way forward with the accessories wiring.) Delia put a finish coat on the lower panels and then brought her scenery out over the edge in the front. I "grassed in" the right and left front corners, permanently attaching the scenes that go in those places. I finished the scenes that go along the side steps on plates to travel since they go over platform breaks. I'll show you the front left and front right corners. Since the guys have to get the control panel in over the right side step (as you can see in my picture of the front right corner) and the lighting strip is hanging loose, you'll not see that today.

BarbTom releases screws on upright platform to lower itJohn & Tom check animations wiring on back platformJohn & Tom check wiring on animations on rear platformFront edge sceniked infront left corner of FHL grassed inFront right corner of FHL grassed in place

Attachments

Images (6)
  • Tom releases screws on upright platform to lower it
  • John & Tom check accessories wiring on back platform
  • John & Tom check wiring on accessories on rear platform
  • Front edge sceniked in
  • front left corner of with scene grassed in
  • Front right corner grassed in place (with panel clipped over it)

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×