Reply to "E-Unit help needed"

CK posted:

I've done that repair before and it should work fine. try not to kink wire when you unwrap it because it may crack on you again. You can also use sandpaper or emery cloth to strip the wire.  

Thanks CK, I have some 2000 grit sandpaper I can use.

Roger

Überstationmeister posted:

It is magnet wire coated in shellac, you can scrape it off with something like an Xacto knife to solder it, but I prefer to use heat to burn off the coating utilizing either the hot iron or judicious use of a pocket lighter. It is usually a good idea to tin the exposed end before soldering it in place.

Thanks! I'll give this a try.

Roger