Skip to main content

Reply to "ELECTRAPACK "C""

Mike,

In addition to the two "handle" outputs, the Z4K also has two fixed outputs on the rear panel - one is 14v output, the other is 10v output.

I don't know what switches you will be running or what voltage the switches need to operate at optimum capacity, but I believe you should be able to run wires from one of those two outputs to a distribution panel (like an MTH 12 terminal panel) and then out to power your switches. Any unused terminals on the panel can also be used to power lighting, accessories, etc., depending on power requirements.  

Fastrack switches need a "minimum" of 5V to operate. They say 14v is optimum, but I have had no problem with using the 10v output on the Z4K and saving the 14v output for other uses.

Last edited by Richie C.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×