The latest updated list:
PTC resettable Fuse - 750mA hold, 1.5A trip for ERR Cruise Commander Lite - Digi-Key: MF-R075-0-99-ND - Notes: These go in one of the motor leads to protect a the drivers from a stalled motor. Only used for the Cruise Commander Lite. (GRJ)
PTC resettable Fuse - 130mA hold, 250mA trip for passenger car LED lighting - Digi-Key: 490-4808-1-ND - Notes: As long as the trip is around 250mA, the hold takes care of itself for LED passenger car lighting applications. (GRJ)
PTC resettable Fuse - 0.5A hold, 1A trip for Fastrack Uncoupler tracks drawing about 1.8A (other brands may have similar requirements?) (PLCPROF)
TVS Conventional - Digi-Key Part Number 1.5KE36CALFCT-ND - 1.5KE36CA - 36 volt, bi-directional - Sized for a PWZW when the whistle button is depressed. This peaks over 33 volts if the compensation winding is considered. (Part number recommended by many, explanation by Dale H) (Digi-Key part numbers from GRJ)
TVS Command Control - Digi-Key Part Number 1.5KE33CALFCT-ND - 1.5KE33CA - 33 volt, bi-directional - Sized for the modern 18 volt bricks. The 18 volts peaks a bit over 25 volts. (HiRailers Unlimited & Independent HiRailers Group, explanation by Dale H) (Digi-Key part numbers derived from GRJ's above for 33 volt version)
For the TVS I believe the 1.5KE36CA is most recommended here on the forum and also the most widely used as it seems it would be suitable for either the modern bricks or the transformers with whistle buttons.
All corrections and/or additions welcome.
