Some additional info here. Engine sits on one end of an oval track. The left side is powered by one leg of tiu ( let's call it #1) the other side by another leg of the tiu (#2). The engine is sitting on the right side of the loop. Last night I turn on power using #2 and engine starts fine. Today I do the same and it starts fine. FYI The track signal is a 10 regardless of which tiu channel. So I shut everything off. Now I start again by turning on power to the #1 channel and the engine cannot be found. Try turning on both channels and engine out of rf range and cannot be found returns. Turn power off and back on and then no problem. There are many engines on the layout without this problem so I'm still looking at the engine here. My real concern here is that if I use this engine in a record/playback session, it may not start when it should.
|
|
