Is your Challenger seeing the DCS signal while on the programming track? Do your other engines run okay on your tracks?
This Forum Topic may help. DCS System Setup Tips
This tip card will help me do all Setup items. Maybe it can help others.
" TIU System Setup Tips
from 5th Edition of MTH Operator's Manual
TIU Power and ID - P. 8
Power Indicator - "Red LED light blinks at initial power up. The TIU address
corresponds to the number of times the Red LED Blinks."
Remote Setup - P. 79 (see note at page bottom.)
at REMOTE MESSAGES - click softkey ON
at OPERATING MODE - choose SPEED or NORMAL (try best one for you)
TIU Setup (for every Remote) - P. 73
With TIU power on, Edit TIUs one at a time.
at Super TIU click SUPER TIU
DCS Setup (for each TIU)
P. 74 Choose AON (All On for DCS signal).
AOF (All Off for DCS signal, NOT All On Fixed),
Set each Variable Output to FXD (fixed) one at a time."
