Guys. I may not have said exactly what I should have, let me give it another try.
There are Jumpers along the loops 3-4 feet apart.
The track is clean
Placed (laid) a piece of insulated wire (24 ga) between loops 1 and loop 2.
PROBLEM!
I connected the wire to a plug (bought a plug from Lowes like I was going to make an extension cord) and connected the wire to the ground post, (no other wires are connected), plugged it into a surge protector, fired the engines and BAM everything shut down, unplugged the 24 ga wire from the surge protector and after resetting , the trains all ran but the TMCC engine stills slows at the far point of the loops.
What am I doing wrong? I think I am very lucky that I didn’t fry my engines. All comments are appreciated and I have thick skin so please comment, all are considered constructive
Thanks for the help
Brent