Skip to main content

Reply to "ERR Cruise Commander issue"

@toddstrick posted:

Hi,



I have a cruise commander installed in a locomotive. It will be running fine then all the sudden to full speed. Press the halt button and start it again and fine until next full speed issue. If it matters it's old MTH PS1

Todd,

I have seen this happen with some older R2LC radios.  If you have an R2LC in this loco, try an R4LC and it may solve the problem.   If not, then the Cruise commander is probably bad.  It is easier to swap the Radio than replace the Cruise commander - worth a try!

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×