Skip to main content

Reply to "ERR Cruise Commander M and a Lionel TMCC N&W J 611, Installation Issues"

In almost all cases Lionel connected the flickering firebox board to track voltage.  I have seen one case where Lionel used a different board and connected it to a point on the command board...a lower volatile output.  None of the CC-M outputs are set for on/off or control of the flickering firebox.  

There are several similar operation (but appear different) implementations by Lionel over the years especially for their early command boards.   As such it is difficult to provide a DIY document that addresses all possible cases.  SPFord27, I hope this helps.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×