Skip to main content

Reply to "ERR Dummy Locomotive Module Lighting"

Alright, 

 

Getting ready to install the LED's on the new Err board and here is the schematic I have drawn. Just a few things need to be clarified on my end and ill be set to go and hopefully wont make magic smoke on this board.

Screen Shot 2017-01-14 at 10.27.25 PM

Note: Pins are label to the corresponding pin out of the ERR cruise commander board

 

Should both grounds go to frame or should I split them like I have in the schematic?

Also the resistor value for both? ( The front lights will have 2 warm white, and 2 green marker lights. The rear (reverse) indication will only have 2 marker red lights)

Thanks!

Attachments

Images (1)
  • Screen Shot 2017-01-14 at 10.27.25 PM

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×