Skip to main content

Reply to "ERR functionality"

Thank you once again for your help.  I've tried and don't see a difference.  The jog wheel responds in the same way.   The speed step commands instructions above say:

Activate 32-Speed Steps: AUX1 + DIR + AUX1 + DIR + BRAKE
Activate 100-Speed Steps: AUX1 + DIR + AUX1 + DIR + BOOST

However, using my Cab 1-TMCC, the engine doesn't respond back at the end of the sequence with a horn acknowledgement.  I do not have a Legacy system.

It does respond back by inserting a zero where the DIR key is in the above command chain.

I'm going to try and hook up my DCS system to the TMCC system and see if the engine responds differently under DCS control.

Am I understanding correctly that in the 32 speed step mode the momentum L M H will work and in 100 speed step it will not?

Thank you.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×