Skip to main content

Reply to "ERR functionality"

The TMCC BASE1/CAB1 only operates in relative speed step mode, I don't think it supports momentum properly.  I did my testing with the Legacy system as the TMCC control operates in absolute speed step mode and does support momentum.

Momentum definitely works with the TMCC Base/CAB-1 with TMCC locos that have Odyssey.  It works perfectly with my CC-II PRR Baldwin Sharks.  With Legacy locomotives when using a TMCC CAB-1, the L, M, and H buttons select 32, 100, and 200 speed step mode.

I'll double check my CC-M equipped locos in 32-step mode.  However, in my case I'm using Lionel R2LC-C08 boards NOT the special ERR R4LC-C08 boards.  But I'm going by what I ordered from Lionel.  If they secretly replaced them with R4LC versions then I don't think there is a way to discern the difference.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×