Skip to main content

ERR install on a Williams brass daylight

Gentlemen,

I completed and ERR install (commander and GS4 sound unit) in an older Williams brass Daylight.  Everything went well.  It ran the layout for about 2 days.  Last night I needed to move it to a siding.  It ran about 20 feet on a straight away, stalled, ran a few feet more then stopped cold.  The Z4000 went red on a short.  I thought it might have been one of the passenger cars is was pulling.

I pulled each car, still in shorted.

I pulled the loco, not shorted (so not a track issue).

I pulled the tether from between the loco and placed only the loco on the tracks.  Headlight came on and No short.

I placed the tender only on the tracks.  No short

I placed them both on the tracks and reconnected the.  The short returned.

I pulled the tender shell.  Still shorted.

I pulled the sound board only.  Still shorted.

Seems like I have an issue within the commander board... if so, WHY?

Other than providing additional cuss words that I may not have covered last evening, Any ideas here???

Troy

Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×