Skip to main content

Reply to "ERR Upgrade Newbie- 6/11/22 Update- Final Assembly and Road Test....Sort Of"

Making more progress

First I had to fix a problem with the rollers. The original rollers are full width and the edges were shorting on my 027 switches. Some time on the grinder solved the problem for the most part. Still some fine tuning to do.

First pass

2021-11-09 19.44.44

Final product

2021-11-09 20.44.25

I picked up the parts I needed for the lighting upgrade. I'm converting to WW led's for directional head lights. Also adding separate number board lights. As per GRJ's wiring diagram, I added 470 ohm resistors to the output side of the led.

The 3mm led's fit perfectly in the headlight holes in the shell. I will add some barriers to control the spill over. One board down, one to go.

2021-11-09 20.46.272021-11-11 21.03.40

Attachments

Images (12)
  • 2021-11-09 19.44.44
  • 2021-11-09 20.44.25
  • 2021-11-09 20.46.27
  • 2021-11-11 21.02.27
  • 2021-11-11 21.02.37
  • 2021-11-11 21.02.46
  • 2021-11-11 21.03.13
  • 2021-11-11 21.03.20
  • 2021-11-11 21.03.33
  • 2021-11-11 21.03.40
  • 2021-11-11 21.05.59
  • 2021-11-12 07.40.03

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×