Keith:
Thanks for the response.
Like RickO, I have used the WS track pens for Steel Rail on both sides of both outer rails. I leave the center rail unpainted because it blends in nicely due to its reflective sides. I also use the WS Weathered Tie for the ties & Rusty Rail along the base of the inner & outer rails.
So far, my FasTrack is not yet mounted on my benchwork. After my modules are stained & sealed (probably next spring & early summer), I will fill the voids under the base with ConTact brand black foam shelf liner (with Scotch double stick tape). These track sections will then be mounted with a layer of the ConTact liner between the track & plywood. Small gray cable ties will serve to fasten the FasTrack to the plywood/ConTact liner.
At this point, I will add the ballast.
In addition the your ballast, what other measures did you employ for sound abatement with your FasTrack ?
Thanks in advance !!!
