Thank you Geysergazer for the quick response:
I tried what you asked and the switch did activate and throw from green to red. Since the remote controller work with the other switch , that says to me the problem is inside the switch machine. I need to flip it upside down again and open it up. because of the heat I have been working on this in the mornings. I had been working on the problem and taken a meter and check continuity from the powerpole connectors to the screw where the controller cable is screwed down. I also checked the copper item on the inner side of the red wire screw.
I think I am going about this the right way? Will continue tomorrow.
Thanks again JimHa