That "hammering mode" allows you to walk around the layout, systematically checking things without having to trundle back to the brick to reset the breaker each time. You can set the PSX to automatically reset like the TMCC Lockon or set it up for manual reset. Like John, I don't like the auto reset feature and have mine on manual reset. Seems like if it is constantly trying to reset it would be hard on the electronics.
Add to that, they will kill the DCS signal if you use them as documented directly to the track.
Not my experience at all. I have mine between the transformer and the TIU. Maybe I did not follow the instructions! The TMCC Lockon does not kill the signal, but definitely degrades it. This may not be an issue for you on your layout. Unfortunately, the PSX also degrades the signal. Both required a 22uH choke to get signal strength back.
With my PH180 bricks and their excellent circuit beakers, I view the TMCC Lockon as an answer to a question that never should have been asked.
I also like the green/red pilot lights The TMCC Lockon provided a convenient way to connect a PowerMaster directly to the track for command only layouts. I would consider it required if you are using the older PowerMaster 135 brick since its CB is not very good.
John SethianMember SUPPORTING MEMBER
