@harmonyards posted:So now with 1000 grit, I’ve taken one slow pass with my block, to show the reveal,…again, this is where primer can bamboozle you into thinking everything is good,….the second picture I’ve circled the low spot, ….it’s faint, but it could show up in our finish top coat, ….so let’s perfect it,….as faint as it is, the best course is to simply shoot a second coat of primer…..according to the can instructions, Im well within the recoat window with having to scuff everything……we’re getting close to wet sanding Gray!…😁 BLOW UP THE SECOND PHOTO!…the blue circle is faint as all get out,…sorry
Pat
OK, I totally get the rationale behind masking, remasking and remasking again. Save the details!
Now in the picture above, it appears your blocking strokes are vertical and I'm guessing your block is horizontal? I'm also guessing that you applied very little pressure on the block.
I have to confess, I don't really see the low spot you have circled. What tells you that is, in fact, a low spot?
George
