Hi all,
After 45 years I am finally starting to build a permanent layout. It will be approximately 30 feet by 21 feet. I plan on mainly post-war but we'll get into some newer stuff, command control on part of it. Can you please advise after looking at my pictures if I should run a solid 12 gauge black common wire around the perimeter of the layout? What would the next step be in adding wiring , should I add terminal strips under the table . In other words what wiring should I lay under the table before I put the table tops on? My table tops will consist of one quarter inch plywood and on top of the plywood I am going to use a 1 half inch fiberboard.
As usual, much thanks, Jerry