Skip to main content

Reply to "First attempt with DCS - Simple 3 loop Christmas layout"

raising4daughters posted:

I probably should've re-read Barry's book (what a great resource for a guy familiar with TMCC but new to DCS).  On p. 95, it states that "Any power supply that provides between 12 and 22 volts AC or DC at 1.5 amps or greater equipped with a compatible barrel plug may be used."  I'll double-check the specs and fit of their connectors, but it appears my 18V DC wall wart or 12V TMCC power supply will work. 

Thanks to all above for the advice thus far. Think I'll try simplest first (one pair of wires to each loop). 

I use a 12 volt Dc power supply to power my TIU with no issues. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×